高压共轨试验台CRS100C

CRS100C高压共轨试验台是在传统试验台的基础上进行嫁接改造的设备，该设备既可以对欧2喷油泵进行检测，也可以对欧3共轨泵、共轨喷油器进行检测。其广泛应用于对原有欧2设备的改造升级和各高校的培训教学。轨道压力为：0～2100bar,由博世共轨喷油泵提供；轨压由电脑控制部分实时测控并调节。可对BOSCH、SIEMENS、DELPHI、DENSO厂家生产的共轨喷油器、喷油泵、共轨管及普通喷油泵（欧Ⅱ）进行检测与调试。电脑控制部分由工业计算机控制，windows系统；内置400余种博世及10几种电装喷油器调试数据，数据可以查询并可自主生成数据并存储。该产品性能稳定、测量准确、有机玻璃防护门，操作易观测更安 全。

一）、高压试验台特点： 

1、工业计算机实时控制，公司自主研发共轨测试系统，windows软件 系统；

2、采用博世高压共轨喷油泵产生0～2100bar压力；

3、轨压实时测量与控制，并具有超压保护功能；

4、喷油器驱动信号脉宽及频率可调；

5、喷油器喷射次数可自由设定；

6、博世、电装、德尔福、西门子等喷油器调试数据近三千种；

7、短路保护功能；

8、测量准确、操作简便、低噪节能

二）、高压共轨试验台测试功能（欧Ⅲ）

1、共轨喷油器密封性能检查

2、共轨喷油器电磁阀性能检测

3、共轨喷油器雾化观察

4、共轨喷油器喷油量均匀性检测

5、共轨喷油器启动油量测试

6、共轨喷油器满载油量测试

7、共轨喷油器怠速油量测试

8、共轨喷油器预喷油量测试

9、共轨喷油器自定义油量测试

10、共轨管密封性能检测

11、共轨管安 全阀性能检查

12、共轨管压力传感器性能检查

13、共轨泵密封性检测

14、共轨泵共轨压力检测

15、共轨泵供油量检测

功能（欧Ⅱ） 

1、测试不同转速下的各缸供油量

2、静态检查各缸供油时间

3、检查机械调速器性能

4、分配泵电磁阀的试验

5、检查气动调速器性能

6、检查压力补偿器性能

7、分配泵回油量测量

8、测量分配泵泵体内压

9、测量齿杆行程

10、进行喷油泵密封性试验

Crs100c high pressure common rail test bench is a grafting equipment based on the traditional test bench. This equipment can detect not only Euro 2 fuel injection pump, but also Euro 3 common rail pump and common rail injector. It is widely used in the transformation and upgrading of the original Euro 2 equipment and the training and teaching of colleges and universities. Rail pressure: 0 ~ 2100bar, provided by Bosch common rail fuel injection pump; The rail pressure is measured and adjusted in real time by the computer control part. It can detect and debug the common rail fuel injector, fuel injection pump, common rail pipe and common fuel injection pump (Euro II) produced by Bosch, Siemens, Delphi and Denso manufacturers. The computer control part is controlled by industrial computer and windows system; There are more than 400 kinds of debugging data of Bosch and more than 10 kinds of electric fuel injectors, which can be queried, generated and stored independently. The product has stable performance, accurate measurement, plexiglass protective door, easy operation and safer observation.

一） High voltage test bench features:

1. Industrial computer real-time control, the company independently developed common rail test system, windows software system;

2. Bosch high pressure common rail fuel injection pump is used to generate 0 ~ 2100bar pressure;

3. Real time measurement and control of rail pressure, with overpressure protection function;

4. The pulse width and frequency of fuel injector driving signal are adjustable;

5. The injection times of the fuel injector can be set freely;

6. There are nearly 3000 kinds of fuel injector commissioning data from Bosch, Denso, Delphi, Siemens, etc;

7. Short circuit protection function;

8. Accurate measurement, simple operation, low noise and energy saving

二） High voltage common rail test bench test function (Euro III)

1. Sealing performance inspection of common rail injector

2. Performance test of common rail injector solenoid valve

3. Atomization observation of common rail injector

4. Uniformity detection of fuel injection quantity of common rail injector

5. Common rail injector starting fuel quantity test

6. Full load fuel test of common rail injector

7. Idle fuel quantity test of common rail injector

8. Pre injection quantity test of common rail injector

9. Custom fuel quantity test of common rail injector

10. Sealing performance test of common rail pipe

11. Performance inspection of common rail pipe safety valve

12. Performance inspection of common rail pressure sensor

13. Sealing test of common rail pump

14. Common rail pressure detection of common rail pump

15. Common rail pump oil supply detection

Function (Euro II)

1. Test the fuel supply of each cylinder at different speeds

2. Statically check the oil supply time of each cylinder

3. Check the performance of mechanical governor

4. Test of distribution pump solenoid valve

5. Check the performance of pneumatic governor

6. Check the performance of pressure compensator

7. Measurement of oil return volume of distribution pump

8. Measure the internal pressure of the distribution pump

9. Measure the gear rod travel

10. Conduct fuel injection pump sealing test

温馨提示：高压共轨试验台CRS100C英文介绍来自百度翻译，仅供参考。